Shore Microsystems.com Shore Microsystems Top for Webpages

Network Protection Chassis - 2700 Series Redundant Technology - Port Level             

 Click below image for Additional Details                                                                                                            


Key Benefits:

  • Auto Switch to Backup on Loss of Connectivity
  • Auto Switch to Primary on Restoration of Connectivity
  • Default Connection to Primary Link on Loss of Power via Patented Straight Through Wire® Technology (with Optional Optical Failsafe for Fiber Cards)
  • “Packet Spy” allows Switching to Backup on Loss of Traffic Flow1
  • Capability to Force Port to Backup Condition
  • Enable/Disable of Automatic Switching (Manual Override)‏
  • Copper Physical Layer – 10/100/1000Mb depending on card selected
  • Fiber Physical Layer - 1000SX, LX, ZX
  • Fiber Physical Layer - 10GBase-SR (10Base-LR & ZR Optional) (Also Supports 1000BaseF [1GB] Fiber)2
  • Deep packet inspection of MPEG video/audio/control/data streams. Detection of up to six simultaneously monitored PIDs (Program Identifiers) with custom thresholds for each PID 3

1 - Not Available on the SM-2701CS   2 - Only Available on the SM-2701F10G
3 - Only Available on the SM-2701CM


Quick Reference - Card Features:

SM-2701C Advanced Redundant Port Card with 3 RJ45 Copper Interfaces (Primary, Backup, Protected) at 10/100/1000 Mb Speeds for Redundant Link Protection Applications.
SM-2701F Advanced Redundant Port Card with 3 SX or LX Fiber Ports (1000 Mb) for Redundant Link Protection Applications.  Also available with optional optical failsafe.
SM-2701CS Standard Redundant Port Card with 3 RJ45 Copper Interfaces (Primary, Backup, Protected) at 10/100/1000 Mb Speeds for Redundant Link Protection Applications. T1 Switching - PRI (Primary Rate Interface) and BRI (Basic Rate Interface) Available Upon Request.
SM-2701CF Advanced Redundant Port Card with Copper 1000 Mb Protected Port and SX or LX Fiber Primary and Backup Ports for Redundant Link Protection Applications.
SM-2701FC Advanced Redundant Port Card with SFP Fiber 1000 Mb Protected Port and RJ45 Copper  Primary and Backup Ports for Redundant Link Protection Applications.
SM-2701IO Input /Output Card with 3 RJ45 Copper Interfaces. These Interfaces Allow Relay-Based Control of the Port Card Fail Over as well as Relay-Based Alarm Notification.
SM-2701S Advanced Redundant Synchronous Serial Card with 68 pin High Density Connector Containing 3 RS-530 Interfaces. These Interfaces Allow Relay-Based Control of the Port Card Fail Over as well as Relay-Based Alarm Notification.
SM-2701RF Redundant RF (0-18GHz) Coaxial Card with 3 SMA Interfaces.
SM-2701F10G Standard Redundant Port Card with 3 SX or LX Fiber Ports (10 GB) for Redundant Link Protection Applications. Power Failure Connectivity is Provided Between Primary and Protected Interfaces.
SM-2701CM Advanced Redundant MPEG Port Card with 3 RJ45 Copper Interfaces. Includes all features of the SM-2701C in addition to programmable failure conditions based on MPEG Transport Stream data content detection.
SM-2701RS Advanced Redundant RS-232 Asynchronous Port Card with 3 RJ45 interfaces.  Supports speeds to 230,400bps.
SM-2701FE Advanced Redundant Port Card with 3 RJ45 10/100Mbps copper interfaces.  Capabilities similar to SM-2701C Advanced Port card but limited to 100Mbps.  Also available with 100BaseFX Fiber interfaces.