Network Protection Chassis - 2700 Series Redundant Technology - Port Level

Click below image for Additional Details


Model: SM-2701C Advanced Copper Card	Model: SM-2701F Advanced Fiber Card	Model: SM-2701CS SM-2701CSL Standard Copper Cards	Model: SM-2701CF Advanced Copper to Fiber Card	Model: SM-2701F10G 10G Fiber Card w Failsafe	Model: SM-2701FC Advanced Fiber to Copper Card

Model: SM-2701IO Contact Closure Card	Model: SM-2701S Advanced RS-530 Serial Card	Model: SM-2701RF RF Coaxial Card	Model: SM-2701CM Advanced MPEG Packet Monitor	Model: SM-2701RS Advanced RS-232 Card	Model: SM-2701FE Advanced 100Mbps Card

Key Benefits:

Auto Switch to Backup on Loss of Connectivity
Auto Switch to Primary on Restoration of Connectivity
Default Connection to Primary Link on Loss of Power via Patented Straight Through Wire^® Technology (with Optional Optical Failsafe for Fiber Cards)
“Packet Spy” allows Switching to Backup on Loss of Traffic Flow¹
Capability to Force Port to Backup Condition
Enable/Disable of Automatic Switching (Manual Override)‏
Copper Physical Layer – 10/100/1000Mb depending on card selected
Fiber Physical Layer - 1000SX, LX, ZX
Fiber Physical Layer - 10GBase-SR (10Base-LR & ZR Optional) (Also Supports 1000BaseF [1GB] Fiber)²
Deep packet inspection of MPEG video/audio/control/data streams. Detection of up to six simultaneously monitored PIDs (Program Identifiers) with custom thresholds for each PID ³

1 - Not Available on the SM-2701CS 2 - Only Available on the SM-2701F10G
3 - Only Available on the SM-2701CM

Quick Reference - Card Features:

SM-2701C	Advanced Redundant Port Card with 3 RJ45 Copper Interfaces (Primary, Backup, Protected) at 10/100/1000 Mb Speeds for Redundant Link Protection Applications.
SM-2701F	Advanced Redundant Port Card with 3 SX or LX Fiber Ports (1000 Mb) for Redundant Link Protection Applications. Also available with optional optical failsafe.
SM-2701CS	Standard Redundant Port Card with 3 RJ45 Copper Interfaces (Primary, Backup, Protected) at 10/100/1000 Mb Speeds for Redundant Link Protection Applications. T1 Switching - PRI (Primary Rate Interface) and BRI (Basic Rate Interface) Available Upon Request.
SM-2701CF	Advanced Redundant Port Card with Copper 1000 Mb Protected Port and SX or LX Fiber Primary and Backup Ports for Redundant Link Protection Applications.
SM-2701FC	Advanced Redundant Port Card with SFP Fiber 1000 Mb Protected Port and RJ45 Copper Primary and Backup Ports for Redundant Link Protection Applications.
SM-2701IO	Input /Output Card with 3 RJ45 Copper Interfaces. These Interfaces Allow Relay-Based Control of the Port Card Fail Over as well as Relay-Based Alarm Notification.
SM-2701S	Advanced Redundant Synchronous Serial Card with 68 pin High Density Connector Containing 3 RS-530 Interfaces. These Interfaces Allow Relay-Based Control of the Port Card Fail Over as well as Relay-Based Alarm Notification.
SM-2701RF	Redundant RF (0-18GHz) Coaxial Card with 3 SMA Interfaces.
SM-2701F10G	Standard Redundant Port Card with 3 SX or LX Fiber Ports (10 GB) for Redundant Link Protection Applications. Power Failure Connectivity is Provided Between Primary and Protected Interfaces.
SM-2701CM	Advanced Redundant MPEG Port Card with 3 RJ45 Copper Interfaces. Includes all features of the SM-2701C in addition to programmable failure conditions based on MPEG Transport Stream data content detection.
SM-2701RS	Advanced Redundant RS-232 Asynchronous Port Card with 3 RJ45 interfaces. Supports speeds to 230,400bps.
SM-2701FE	Advanced Redundant Port Card with 3 RJ45 10/100Mbps copper interfaces. Capabilities similar to SM-2701C Advanced Port card but limited to 100Mbps. Also available with 100BaseFX Fiber interfaces.